Select Page

9-String Original Quads P7 Soapbar – P79C

Deep, complex Original voice in a Real Big P7 9-string soapbar.

$320.00

Original Quads provide you with bottomless lows and low-mids along with tonal complexity for excellent bite and growl. They are full and warm for vintage tone, enhancing the natural voice of your bass. They can handle wide string spacing and produce clear, defined tone. The pickup is very much like our Original Soapbars, but it has 4 coils instead of 2.
The coils can be split in 2 different ways – to inline pairs or as P and reverse P which requires special wiring. The 4 coils are packed into the shell and then fully shielded and sealed so they are sweat-proof and immune from invisible noise stage and studio equipment. The cables are shielded too.
Available in balanced versions for neck (Bass, -B) and bridge (Treble, -T).

Ordering Details

ModelDescriptionUPCPrice
P79C-B9-String, P7 Soapbar, Original Quad Coil, Neck Position$320
P79C-T9-String, P7 Soapbar, Original Quad Coil, Bridge Position$320

Ordering Details

ModelUPCPrice
P79C-B$320
9-String, P7 Soapbar, Original Quad Coil, Neck Position
P79C-T$320
9-String, P7 Soapbar, Original Quad Coil, Bridge Position

P79C Technical Details

Coil Structure:
Quad Parallel Humbucking
Cable Type:
4-Conductor Cable with shield and bare drain
Magnetic Circuit:
3 types of Carbon steel and brass powered by ceramic (ferrite) magnets projected shallow for wide aperture and compensated for maximum sensing width
Neck coils South and Bridge coils North for both positions

P79C-B - Neck

  • DC Resistance: ~4.2KΩ each inline coil pair
  • Resonant Frequency: ~5.2KHz
  • Sensing Width: 5.15" [131mm] Max, 3.50" [89mm] Min

P79C-T - Bridge

  • DC Resistance: ~5.0KΩ each inline coil pair
  • Resonant Frequency: ~4.5KHz
  • Sensing Width: 5.15" [131mm] Max, 3.50" [89mm] Min

Shape Details

See other Real Big

P7 Soapbar

  • 6.25" [159mm] Long,
    1.25" [32mm] Wide,
    0.78-0.85" [19.8-21.6mm] Thick + 0.15" [3.8mm] Cable
  • 1 hole on bass end and 1 on treble end for your #4 pan head screws

Some other options: