Select Page

7-String Original Split CG7 Soapbar – CG77M

This narrow soapbar shape is used in several instruments imported from China. The shape was initially created by G&B. These are an excellent upgrade for Schecter and other 7-string basses. They have split hum-cancelling coils and a deep voice.

$195.00

Voiced very similar to our Original Dual Coil bass pickups, our Split-coil Reverse P design provides extended reach and a wider sensing area, allowing for a narrower pickup to work with wider-spaced strings. Original Split pickups preserve the full-bodied low end of our Original series and adding even more articulation, a simple setup, and high value.
Original Splits provide you with deep lows and low-mids along with nice treble complexity for manageable growl. The coils are fully shielded and sealed so they are sweat-proof and immune from invisible noise stage and studio equipment. The cables are shielded too.
Available in balanced versions for neck (Bass, -B) and bridge (Treble, -T). The bridge pickup has a higher output than the neck pickup, so it is great for cutting through the mix when needed.

Ordering Details

ModelDescriptionUPCPrice
CG77M-B7-String, CG7 Soapbar, Original Split, Neck Position$195
CG77M-T7-String, CG7 Soapbar, Original Split, Bridge Position$195

Ordering Details

ModelUPCPrice
CG77M-B$195
7-String, CG7 Soapbar, Original Split, Neck Position
CG77M-T$195
7-String, CG7 Soapbar, Original Split, Bridge Position

CG77M Technical Details

Coil Structure:
Split Reverse P Hum-killing
Cable Type:
Shielded Coaxial Hot Core
Magnetic Circuit:
2 types of carbon steel powered by ceramic (ferrite) magnets
Opposite polarity for neck and bridge

CG77M-B - Neck

  • DC Resistance: ~9.8KΩ
  • Resonant Frequency: ~5.8KHz
  • Sensing Width: 4.25" [108mm] Max 2.83" [72mm] Min

CG77M-T - Bridge

  • DC Resistance: ~11.1KΩ
  • Resonant Frequency: ~4.9KHz
  • Sensing Width: 4.25" [108mm] Max 2.83" [72mm] Min

Shape Details

See other CG7 Soapbars

CG7 Soapbar

  • 5.18" [131.6mm] Long,
    1.08in [27.5] Wide,
    0.74-0.84" [18.8-21.3mm] Thick + 0.11" [2.8mm] Cable
  • 2 holes on bass end and 1 on treble end for your #4 pan head screws

Some other options: