|
Electronic Accessories |
Switches |
|
| . |
|
| SPDT(on-on) |
1 pole/2 position (3 lugs) - bright chrome - round bat - for 3S tap
switch |
| . |
|
| SPOT(on-off-on) |
single pole/3 position/center off - bright chrome - round bat - for
coil cutting |
| . |
|
| DPDT(on-on) bright |
2 pole/2 position (6 lugs) - bright chrome - round bat - for
Active/Passive, or Series/Parallel or ? switching |
| . |
|
| DPDT(on-on) satin |
2-pole/2-position (6 lugs) - satin chrome - flat bat - same use as
above |
| . |
|
| DPDT(on-on) black |
2-pole/2-position (6 lugs) - black - round bat - same use as
above |
| . |
|
| DPOT(on-off-on) |
2-pole/3-position/center off (6 lugs) - bright chrome - round bat -
for coil cutting on 4 coil humbuckers or ? |
| . |
|
| DPOT(on-off-on) black |
2-pole/3-position/center off (6 lugs) - black - flat bat - same use
as above |
| . |
|
| DPTT (on-on-on) |
2-pole/3-position/center on (6 lugs) - satin chrome - flat bat -
same use as above |
| . |
|
| DPTT (on-on-on) black |
2-pole/3-position/center on (6 lugs) - black - round bat - same use
as above |
| . |
|
| DPTT-M |
same as above - satin chrome/flat bat or black/round bat - prewired
as Mid frequency selector for NTMB |
| . |
|
| 3PDT (on-on) |
3-pole/2-position (9 lugs) - bright chrome - round bat - boost
switch for E90, E92C-B and other active guitar pickups |
| . |
|
| 4PTT(on-on-on) |
4-pole/3-position/center on (12 lugs) - bright chrome - round bat -
selector for triple coil pickups |
| . |
|
| ROTSW |
4-pole/2 to 6 position/shorting Greyhill rotary switch - for triple
coil and many other switching uses |
| . |
|
Potentiometers |
|
| . |
|
| a25KA |
25 K-ohm Audio taper for Active Volume or Tone - 3/8" brass bushing
- knurled shaft |
| . |
|
| a250KA |
250 K-ohm Audio taper for passive Volume or Tone - 3/8" brass
bushing - knurled shaft |
| . |
|
| a500KA |
500 K-ohm Audio taper for passive Volume or Tone - 3/8" brass
bushing - knurled shaft |
| . |
|
| cd50kM |
Center Detent - 50 K-ohm Linear w/resistors - 3/8" brass bushing -
knurled shaft - for TCT family Mid control |
| . |
|
| cd50kS |
Center Detent - 50 K-ohm Linear - 3/8" brass bushing - knurled
shaft - for NTBT or NTMB Bass, Mid or Treble controls |
| . |
|
| cd50kS-PP |
Center Detent - 50 K-ohm Linear - 3/8" brass bushing - knurled
shaft - for NTBT or NTMB Bass, Mid or Treble controls with DPDT push-pull
switch - can select 2 mid frequencies without adding a toggle switch! |
| . |
|
| cd500kA |
Center Detent - 500 K-ohm Audio taper - 3/8" brass bushing -
knurled shaft - for TCT family Bass or Treble controls |
| . |
|
| cd25KD |
Center Detent - 25 K-ohm MN taper Dual - 3/8" brass bushing -
knurled shaft - Blend control for MPB1, DTA1.x, AGDB and other low
impedance buffers |
| . |
|
| cd50kD |
Center Detent - 50 K-ohm MN taper Dual - 3/8" brass bushing -
knurled shaft - Blend control for DBC, TC4, TC6 and other medium
impedance buffer or preamps |
| . |
|
| cd250KD |
Center Detent - 250 K-ohm MN tapers - 3/8" brass bushing - knurled
shaft - Blend control for passive pickups |
| . |
|
| DC250kA |
Dual Concentric - 250 K-ohm Audio - 9mm bushing - no center detent
- with knobs - for stacked Volume/Volume application |
| . |
|
| DC50kBcd |
Dual Concentric - Center Detent - 50 K-ohm Linear - 9mm bushing -
for NTBT or NTMB Bass, Mid or Treble controls |
| . |
|
| DC500kAcd |
Dual Concentric - Center Detent - 500 K-ohm Audio taper - 9mm
bushing - for TCT family Bass or Treble |
| . |
|
| m5KS or m5Ks |
5 K-ohm Linear - splined or solid - knurled or solid shaft - 24mm
diameter - 0.25": diameter x 0.31" length bushing - for boost control. |
| . |
|
| m50kd |
Dual 50 K-ohm Linear - solid shaft - 24mm diameter - 0.25" diameter
x 0.31" length bushing - for EZQ frequency or Q control |
| . |
|
| pp250KA |
250 K-ohm Audio taper with Push-Pull switch - 7mm diameter x 10mm
long bushing - knurled shaft - DPDT push-pull switch - for Active/Passive
Volume or Tone - cannot be used as Active/Passive for TCT family preamps |
| . |
|
Shielding and Cables |
|
| Cu Foil Shielding |
6" x 12" x 1.25 mil (0.00125") Copper Foil with adhesive
backing |
| . |
|
| 1-conductor (braid) |
1 conductor cable with braided shield - 0.110" diameter - Belden
8216 |
| . |
|
| 2-conductor (braid) |
2 conductor cable with wrap shield - 0.100" diameter |
| . |
|
| 4-conductor (foil) |
4 conductor cable with foil shield - 0.150" diameter |
| . |
|
| 6-conductor (foil) |
6 conductor cable with foil shield - 0.170" diameter |
| . |
|
|
| . |
|
|
back to Product
Description |